Panel Mould Round Over bit
These cutters are primarily designed to produce panel moulds on cabinet doors and drawer fronts in the furniture industry. Make round-over shaped panels for any project by routing grooves on the face of the panel.
They may also be used for edge moulding round over profiles.
This router bit has a 12,7 mm shank (shaft) that will fit most large routers. Please ensure that you select a router bit with a shank (shaft) size that will fit into your router collet.
PRO-TECH router bits are manufactured in Taiwan.
|Part No.||Shank dia.||Cutting width||Cutting Height||Radius|
|KP49570||1/2 inch||1 inch||1/2 inch||7,5|
|12,7 mm||25,4 mm||12,7 mm||7,5 mm|
Length of Shank: 32 mm