Menu
Your Cart

Slot cutter

ARBOR FOR SLOTTING CUTTER C/W BEARING. NUT & 2 X WASHERS 1/2' SHANK
Hot
Available Stock: In Stock Model: KP4302
Arbor   Arbor - Slot cutter Use this arbor fitted with a slot cutter where a groove (slot) is required on the side of wood with a specific set cutting height.   This router bit has a 12.7mm shank (shaft) that will fit most large routers with the correct collet. Please ensure tha..
R 989.46
Ex VAT:R 860.40
Available Stock: In Stock Model: KP570811
4 Wing Slot Cutter Replacement blade   For 4-Wing carbide tipped Four-wing slot cutters are convenient where higher feed rates are required in production. With an overall diameter of 50,8 mm, this cutter should be treated with care. Can be used with our arbors KP7004-4 and KP4301 ..
R 438.55
Ex VAT:R 381.35
Available Stock: In Stock Model: KP570821
4 Wing Slot Cutter Replacement blade   For 4-Wing carbide tipped Four-wing slot cutters are convenient where higher feed rates are required in production. With an overall diameter of 50,8 mm, this cutter should be treated with care. Can be used with our arbors KP7004-4 and KP4301 ..
R 438.55
Ex VAT:R 381.35
Available Stock: In Stock Model: KP570851
4 Wing Slot Cutter Replacement blade   For 4-Wing carbide tipped Four-wing slot cutters are convenient where higher feed rates are required in production. With an overall diameter of 50,8 mm, this cutter should be treated with care. Can be used with our arbors KP7004-4 and KP4301 ..
R 438.55
Ex VAT:R 381.35
Available Stock: In Stock Model: KP1102
Slot Cutter  Use this slot cutter where a groove (slot) is required on the side of wood with a specific set cutting height.   This router bit has a 6.35 mm shank (shaft) that will fit most small or large routers with the correct size collet. Please ensure that you select a r..
R 438.55
Ex VAT:R 381.35
Available Stock: In Stock Model: KP1103
Slot Cutter  Use this slot cutter where a groove (slot) is required on the side of wood with a specific set cutting height.   This router bit has a 6.35 mm shank (shaft) that will fit most small or large routers with the correct size collet. Please ensure that you select a r..
R 438.55
Ex VAT:R 381.35
Available Stock: In Stock Model: KP1104
Slot Cutter  Use this slot cutter where a groove (slot) is required on the side of wood with a specific set cutting height.   This router bit has a 6.35 mm shank (shaft) that will fit most small or large routers with the correct size collet. Please ensure that you select a r..
R 438.55
Ex VAT:R 381.35
Available Stock: In Stock Model: KP570841
4 Wing Slot Cutter Replacement blade   For 4-Wing carbide tipped Four-wing slot cutters are convenient where higher feed rates are required in production. With an overall diameter of 50,8 mm, this cutter should be treated with care. Can be used with our arbors KP7004-4 and KP4301 ..
R 438.55
Ex VAT:R 381.35
Available Stock: In Stock Model: KP570831
4 Wing Slot Cutter Replacement blade   For 4-Wing carbide tipped Four-wing slot cutters are convenient where higher feed rates are required in production. With an overall diameter of 50,8 mm, this cutter should be treated with care. Can be used with our arbors KP7004-4 and KP4301 ..
R 434.36
Ex VAT:R 377.70
Available Stock: In Stock Model: KP1101
Slot Cutter  Use this slot cutter where a groove (slot) is required on the side of wood with a specific set cutting height.   This router bit has a 6.35 mm shank (shaft) that will fit most small or large routers with the correct size collet. Please ensure that you select a r..
R 430.10
Ex VAT:R 374.00
Available Stock: In Stock Model: KP4104
3 Wing Slot Cutter Replacement blade   For 3-Wing carbide tipped Three-wing slot cutters are convenient where intermediate feed rates are required in production. With an overall diameter of 50,8 mm, this cutter should be treated with care. Can be used with our arbors KP7004-4 and KP..
R 411.70
Ex VAT:R 358.00
Available Stock: In Stock Model: KP4101
3 Wing Slot Cutter Replacement blade   For 3-Wing carbide tipped Three-wing slot cutters are convenient where intermediate feed rates are required in production. With an overall diameter of 50,8 mm, this cutter should be treated with care. Can be used with our arbors KP7004-4 and KP..
R 389.45
Ex VAT:R 338.65
Showing 1 to 12 of 15 (2 Pages)