Available Stock: In Stock
Model: KP10
Spindle
cutter - Quarter round 3/8' and Bead 1/4'
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft.
The cutter can be configured to cut quarter rounds and beads
KP800020 - 3/4' - 1/2' s..
R 1,038.80
Ex VAT:R 903.30
Available Stock: In Stock
Model: PT18560AL
SAW BLADE TCT 185 X 2.2 X 20 X 60T ALUM. PROF.....
R 1,032.82
Ex VAT:R 898.10
Available Stock: In Stock
Model: PT23060-30
SAW BLADE TCT 230 X 2.4 X 30 X 60T WOOD PROF.....
R 1,030.06
Ex VAT:R 895.70
Available Stock: In Stock
Model: KP234431B
Profile
router bits with plunge cut capability and top bearing
Classical Plunge Bitt
Use this carbide tipped classical plunge bit for routing decorative details on the
face of raised panels or solid wood panelling using a template. Edge profiling is possible in a router table setup.
These ..
R 1,028.85
Ex VAT:R 894.65
Available Stock: In Stock
Model: PTD0530
DOMINO TENON 5.5 X 28.5MM 400PC JAR BEECH WOOD....
R 1,022.47
Ex VAT:R 889.10
Available Stock: In Stock
Model: KP211432
Profile
router bits with plunge cut capability
Classical Plunge Bit
Use this carbide tipped classical plunge bit for routing decorative details on the
face of raised panels or solid wood panelling. Edge profiling is possible using
a fence. These anti-kickback bits have more body mass, and ..
R 1,017.00
Ex VAT:R 884.35
Available Stock: In Stock
Model: PTAF001
RADIUS ANGLE GAUGE 3PC (R10,R15,R20,R25,R30,R35)....
R 1,011.14
Ex VAT:R 879.25
Hot
Available Stock: In Stock
Model: KP4302
Arbor
Arbor - Slot cutter
Use this arbor fitted with a slot cutter where a groove (slot) is required on the side of wood with a specific set cutting height.
This router bit has a 12.7mm shank (shaft) that will fit most large routers with the correct collet. Please ensure tha..
R 989.46
Ex VAT:R 860.40
Available Stock: In Stock
Model: KP238431
Profile
router bits with plunge cut capability
Pierce & Round Over
Plunge Bit
This
very special router bit is a round over bit with a slightly longer straight cutting
edge at the bottom. Round overs are classified by the radius they cut. A ½ inch
radius bit (12,7 mm) cut a round over..
R 983.88
Ex VAT:R 855.55
Available Stock: In Stock
Model: KP609411
Tongue & Groove
Carbide
Tipped - Tongue & Groove
The cutter is fitted with 2 bearing guides to assist with alignment and
initial setup. Material up to 19mm thick can easily be joined.
The cutter is designed to be used in a router table.
This router bit has a 12.7mm shank (shaft..
R 980.09
Ex VAT:R 852.25
Hot
Available Stock: In Stock
Model: KP3702
Edge
profile router bits
Ogee & Fillet profile
Carbide
Tipped
The ogee and fillet profile router bit is designed for creating decorative mouldings or edge profiles. This cutter allows one to shape a convex and concave shape.
Adding to the depth of cut a fillet (bead) will be produced.
..
R 971.87
Ex VAT:R 845.10
Available Stock: In Stock
Model: KP303431
Edge
profile router bits
Double round profile
Carbide
Tipped
The double round profile router bit is designed for creating decorative mouldings or edge profiles.
These cutters allow you to shape two roundovers. A bead over the top corner is possible when increasing
the depth of cut. By r..
R 971.87
Ex VAT:R 845.10