Mould router bit
Give your furniture and cabinets a classic, architectural look with this unique molding router bit. Perfect for chair rails, crown molding, door casings, trim, pilasters, window casing/sills, baseboards and picture frames, you can use the full profile, or just a portion of it to achieve the look you want.
The timber is held securely against the bearing and the bit makes the cut. This leaves you free to feed the timber steadily - and your hands can safely be a long way from the cutters. Plan to cut the profile in several passes - taking only a small amount off on the last cut to get the best quality. Features two flutes and a 3/8' ball bearing guide.
This two-flute router bit is well balanced, eliminating vibration that degrades the cut finish.
PRO-TECH router bits are manufactured in Taiwan.
Router Bit Maintenance
Fortunately, this is pretty easy. The best way to prolong the life of a router bit is to keep it clean. And what you need to do varies with the type of bit.
Note: Sharpening is extremely important too.
Bits with Bearings:
To clean bits with bearings, first, remove the bearing. Then clean the bit as you did with non-bearing bits.
It's important to remove the bearings because even though router bearings are 'sealed,' resin remover can sneak in and dissolve the bearing grease. If this were to happen, you would be faced with the problem of trying to lubricate a sealed bearing.
Despite the claims of bearing grease sellers, we've never had much luck with this. Once that grease is gone, just go buy a new bearing.
Periodically inspect the shanks of your router bits for rust or burrs. Either of these can be removed quickly with ScotchBrite®. Left on, they can interfere with your ability to properly tighten the bit in the collet.
|1 3/32 inch
Length of Shank: 32 mm