Forstner bit - Ø 20mm
The Forstner bit is optimized for woodworking applications to cut exceptionally precise with a minimum amount of tear-out. The bit is ideal for drilling flat-bottomed holes for many hardware installations.
The Forstner bit is guided by the wide outside rim, whereas other wood drill bits are guided by the tip. For this reason, the drill bit can be used with a drill press to drill angled or partially overlapped holes.
How to sharpen a Forstner bit
Tools required for sharpening:
- Diamond file (600 mesh)
- Mini rotary tool with a cone shaped grinding point
- Permanent marker
Use a permanent marker, and colour in the inside bevelled edge of the Forstner bit.
Use a mini rotary tool with a cone shaped grinding point and lightly grind the bevel to expose the steel from under the coloured in area.
Use the diamond file on the inside flat edge of the Forstner bit. Count the amount of sharpening strokes made by the file and repeat on the other side.
Never sharpen a Forstner bit on the outside circumference as it will change the bit's size.
|consider safety for your health and the people around you|
General safety suggestions:
It is advisable to always have the following items nearby and in a good condition
|Material||High-Speed Steel (HSS)|